Marine31 Online Forum
Welcome to the Marine 31 Forum.
Header

Marine 31 Forum » Boat Detailing » Ask Mike Phillips your Boat Detailing Questions » Safety First - Always plug-in to a GFI or Ground Fault Interrupter

Notices

Ask Mike Phillips your Boat Detailing Questions If you have a question about detailing your boat with Marine 31 products or about something you saw on Ship Shape TV or in a video, please post your questions in this forum.

Reply
Thread Tools vBmenu Seperating Image
Safety First - Always plug-in to a GFI or Ground Fault Interrupter
Old 03-23-2015, 12:42 PM   #1
Mike Phillips
 
Mike Phillips's Avatar
 
Status: Director of Training
Join Date: Apr 2013
Posts: 675
Default Safety First - Always plug-in to a GFI or Ground Fault Interrupter

Safety First - Always plug-in to a GFI or Ground Fault Interrupter



I do a lot of damp sanding and teach damp sanding using dual action polishers as well as dry sanding and wet sanding by hand . The entire idea behind damp sanding is unlike WET sanding you're only using a little water. So as long as you're using common sense there shouldn't be any safety issues.


Boat Detailing
This is also important if you're going to machine scrub molded-in non-skid surfaces.

If machine scrubbing non-skid surfaces inside your boat, do all the scrubbing first and then remove any electric tools and power cords from INSIDE your boat and from AROUND your boat before you bring out a water hose to wash and flush the non-skid clean.

If you're going to use any type of electrical tool around water you should always be plugged into a GFI or Ground Fault Interrupter equipped electrical outlet.

If you don't have access to electrical outlets with GFI built-in then you can purchase a dedicated GFI like you see in the pictures below.

I also use a GFI when I machine scrub tires or clean vinyl or non-skid surfaces in boats using electrical tool. (SEE BELOW).


For anyone reading this, use common sense and keep water away from any electrical tool and always use a GFI or Ground Fault Interrupter when using electrical tools. If your electrical outlets do not offer GFI then you can get a dedicated GFI at any hardware store.

Looks and works like this...













For the last few years I've been showing a lot of people how to take their electric dual action polishers and turn them into machine wet sanders as well as how to take their Porter Cable, Griot's Garage and Meguiar's G110v2 dual action polishers and turn them into machine scrubbers for rubber, vinyl, non-skid decks on boats, etc.
(See the follow-up post below)


Wet Test
There are no electric tools that will pass the wet test. That's where an electrical tool is tested by blasting it with water.


Common Sense
I've never been electrocuted when machine sanding or machine scrubbing tires or on-skid surfaces but I also use common sense when using any tools anywhere.




__________________
__________________
Made by boat people for boat people...
Mike Phillips is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:28 AM.