New Product Announcements We're always introducing new innovative products to make detailing your boat easy and fun while saving you time and money! |
![]() |
Thread Tools | ![]() |
![]() |
#1 | |
Status: Super Moderator
Join Date: May 2013
Posts: 98
|
![]() You talked and we listened! Introducing Marine 31 Gel Coat Heavy-Cut Cleaner Wax - the best boat cleaner wax money can buy.
![]() We have received an overwhelming amount of requests for a heavy cut cleaner wax since Marine 31 launched last March; needless to say we've been hard at work the last few months developing this product. With the new Gel Coat Heavy-Cut Cleaner Wax, we've essentially eliminated the need for a two-step compound and wax for most applications. Quote:
Marine 31 Gel Coat Heavy-Cut Cleaner Wax 16 oz. Marine 31 Gel Coat Heavy-Cut Cleaner Wax 32 oz. Marine 31 Gel Coat Heavy-Cut Cleaner Wax 64 oz. |
|
![]() |
![]() |
![]() |
#2 |
Status: Member
Join Date: May 2013
Location: Land O' Lakes, FL
Posts: 44
|
![]() now that's a great idea. the older i get, the better reduced steps in detailing look.
![]() |
![]() |
![]() |
![]() |
#3 |
Status: Member
Join Date: Jun 2013
Location: Cape Coral, Fl.
Posts: 37
|
![]() I just ordered this product yesterday, and I will have a review up next week!
|
![]() |
![]() |
![]() |
#4 |
Status: Super Moderator
Join Date: May 2013
Posts: 98
|
![]() |
![]() |
![]() |
![]() |
#5 |
Status: Member
Join Date: Jun 2013
Location: Cape Coral, Fl.
Posts: 37
|
![]() Today I did my testing with Marine 31 Heavy Cut Cleaner Wax. The product was all you could want in a one step cut, polish and protect. I used my Griot's machine on speed 4 with the backing plate provided by them and a 6 inch lake country blue hybrid wool pad. Using an over lapping thatch pattern I did the usual 2x2 section with medium hand speed and pressure. After three passes the surface was back to a like new condition. As you can see all of the staining and oxidation is gone. The Rv I was working on was not heavily oxidized but one thing you run into in my industry of high volume Rv and Boat reconditioning is the need for good results in minimal time, and this did just that. I did notice that it was best to wipe off as you go instead of doing a large section and coming back, seeing as it was a harder to wipe off when left to dwell. This might have been because of weather it was cold Florida day. I will give and update on that when I have a chance to work with it in real Florida conditions. Any way I much prefer to wipe as I go just to make sure everything is being done properly. Over all I think this product is great and I look forward to further use and testing in a more high volume atmosphere.
|
![]() |
![]() |
![]() |
#6 |
Status: Junior Member
Join Date: Jan 2014
Posts: 13
|
![]() I just ordered the Heavy Cut Cleaner Wax and think I may have ordered the wrong applicator. I ended up choosing this foam pad:
LC-WP-24650-X - 6.5 Inch Lake Country Waffle Pro Orange My boat is about 14 years old but has been maintained reasonably well. It sits in the water year round and the bow gets sun much of the day so I always have a little oxidation to deal with in the spring. I like the idea of an all-in-one product if it really works so I have high hopes for this product. I'm planning to apply with a Griots 6" DA. Should I have gone with a wool pad, or the foamed wool pads instead? |
![]() |
![]() |
![]() |
#7 | |
Status: Super Moderator
Join Date: May 2013
Posts: 98
|
![]() Quote:
Try a test spot and see how that combination works for you. If you're happy with the results, then get to work! If not, then you'll want to order a couple of the 6.5 inch Foamed Wool pads. ![]() |
|
![]() |
![]() |
![]() |
#8 | |
Status: Junior Member
Join Date: Jan 2014
Posts: 13
|
![]() Quote:
That's my plan since UPS just notified me the stuff should be here tomorrow. I'm planning to head to the boat this weekend to give it a whirl. But for education purposes, why would I choose one (foam) over the other (wool)? Does it boil down to wool cuts better? If that's the case, then what tradeoff is there to using wool? In other words, why wouldn't I just use wool all the time? |
|
![]() |
![]() |
![]() |
#9 |
Status: Member
Join Date: Jun 2013
Location: Cape Coral, Fl.
Posts: 37
|
![]() Wool cuts better but foam finishes better. The whole concept of a cleaner wax is to be able to do the job in one step. Purple foamed wool finishes really nice but I have had issues with pads coming apart. The blue foamed wool holds up really well but sometimes the finish isn't as nice.
|
![]() |
![]() |
![]() |
#10 |
Status: Junior Member
Join Date: Jan 2014
Posts: 13
|
![]() I did a few test spots today with the orange pad on my Griots machine. I'm happy but I don't think I got the best results possible from my gelcoat.
I need help deciding if I should use the same product with a wool pad, or if I'm expecting too much from an AIO product. The finish looked good, maybe even really good. But it didn't look quite as deep as I was hoping...maybe a look that can only be achieved through a multi step process?? I don't mind testing a few things before committing to an entire process. It's a 40' boat so whatever I do is going to take some time!! |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Marine 31 Gel Coat Heavy Oxidation Cleaner and Flex 3401 | professionalpolishing | Flex XC3401 Forced Rotation DA Polisher | 6 | 06-25-2014 10:36 AM |
Marine 31 Gel Coat Heavy-Cut Oxidation Cleaner | Mike Phillips | Compounds, Polishes and Waxes | 15 | 06-08-2013 01:29 PM |