Marine31 Online Forum
Welcome to the Marine 31 Forum.
Header

Marine 31 Forum » Buffers - Polishers - Pads and Pad Cleaners » Rotary Buffers - Including Flex, DeWALT and Makita Rotary Buffers also called Sander/Polishers » DeWALT DWP849X vs Makita 9227C Rotary Buffers

Notices

Rotary Buffers - Including Flex, DeWALT and Makita Rotary Buffers also called Sander/Polishers Any questions you have about rotary buffers should be posted to this forum.

Reply
Thread Tools vBmenu Seperating Image
DeWALT DWP849X vs Makita 9227C Rotary Buffers
Old 06-20-2013, 10:25 AM   #1
Mike Phillips
 
Mike Phillips's Avatar
 
Status: Director of Training
Join Date: Apr 2013
Posts: 675
Default DeWALT DWP849X vs Makita 9227C Rotary Buffers

DeWALT DWP849X vs Makita 9227C Rotary Buffers





First both tools are exceptionally well built, strong performers for their class which is Full Size Rotary Buffers. This article is just to give you a close-up look at each tool with high resolution pictures, resized for easy viewing on any computer monitor. The goal of this article is to simply let you see up close, what each tool looks like and offers in the way of design, fit and finish.

If you attend any of my automotive or marine detailing classes you are always strongly encouraged to take both of these tools as well as all the tools we carry for a test drive and see for yourself, which tools fits you best.



Left: DeWALT DWP849X Right: Makita 9227C Rotary Buffers





The DeWALT comes with a soft rubber cap over the head of the polisher. This serves two function,
1. It makes gripping and holding onto the head comfortable and secure.

2. It acts as a bumper to prevent scratching or marring if you accidentally bump the head of the polisher into any painted surface an other components.





Soft Rubber Tool Rest
There is as soft rubber horizontal tool rest across the top of the DeWALT at both the front and the back. This keeps the tool from sliding off a smooth surface or even scratching it should you lay the polisher down when not in use.




Below you can see the rear soft rubber tool rest and also note the speed selector is recessed to help prevent accidental changes in speed while using the tool.




Recessed Lock Button
The drive gear lock button is also recessed to prevent you from accidentally pressing the button when gripping the head of the unit while running the buffer.





Wool Ingestion Shields
The fresh air intake has a wire mesh shield to help prevent wool fibers and other debris from being sucked into the motor and body cavity.







The Makita 9227C


Powder Coated Head
The head unit of the Makita Rotary Buffer comes with a powder coating that is corrosion resistant.




Metal Tool Stands
Their are two raised metal tool stands at the head of the polisher stable when placed upside down and not in use.





At the end of the tool there is a hard plastic tool stand and the variable speed dial is exposed.




Semi-Recessed Lock Button
The locking button for the drive gears is semi-recessed with a raised ring surrounding the button to help prevent accidental engagement while operating the buffer.





Side Air Vents









On Marine31.com

DeWalt DWP849X 7”/9” Variable Speed Rotary Polisher

Makita 9227C Rotary Polisher
__________________
Made by boat people for boat people...
Mike Phillips is offline   Reply With Quote
Old 06-20-2013, 06:11 PM   #2
tropicsteve
 
tropicsteve's Avatar
 
Status: Member
Join Date: May 2013
Location: Land O' Lakes, FL
Posts: 44
Default Re: DeWALT DWP849X vs Makita 9227C Rotary Buffers

lots of good info there mike. is one unit any heavier than the other ? i got the makita and was surprised at how heavy it was compared to my griot's da.
tropicsteve is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:45 AM.