Quote:
Originally Posted by kinder car care
Went over this area about 3 section passes with each product, more or less as a test spot and to see basically what would happen.
I really don't know what to expect, before there was no shine and it's badly oxidized.
After I'm starting to get a little gloss but this is going to be a slow process isn't it.
|
With foam pads "yes" it's going to be a lot slower than using a wool pad on a rotary buffer.
Quote:
Originally Posted by kinder car care
I might try my rotary with my pink light cutting pad today with the same technique as I did with my flex to see if there's any difference.
|
Try the pink foam pad because it's good experience and then try a wool cutting pad.
Gel-coats like wool pads on rotary buffers when you're trying to cut off the dead, oxidized gel-coat and restore a high gloss finish.