Thread
:
How to wetsand, cut and buff a gel-coat boat
View Single Post
05-06-2014, 02:03 PM
#
3
Mike Phillips
Status:
Director of Training
Join Date:
Apr 2013
Posts:
675
Re: How to wetsand, cut and buff a gel-coat boat
It's 5:00 O'clock and we're ready to get started!
Here's Antti machine damp sanding the hull of this Shearwater to quickly remove 6 years of oxidation, staining and water spots.
Here's John sanding down the other side....
This was John's first time to machine sand a boat using a Rupes Duetto....
Here's what the sanding marks look like as John works down the side of the hull....
Sanding is the easy part.... getting out your sanding marks is the tricky part...
__________________
Made by boat people for boat people...
Mike Phillips
View Public Profile
Send a private message to Mike Phillips
Visit Mike Phillips's homepage!
Find More Posts by Mike Phillips