Quote:
Originally Posted by slider67
in the spring my plan is to wash then do a polish then apply the captains uv 50,
any particular polish you have in mind to use,
Tim
|
If it were me and my boat I would use the Captain's Compound
Marine 31 Captain’s One-Step Compound & Polish
It cuts like a compound and finishes like a polish. Then strip the surface using the Blackfire Crystal Coat Paint Prep and then apply the coating.
The high gloss finish you see on the 1960 Glastron was created by only Captains Compound.
The above picture from this write-up
Pictures: 1960 Glastron - Wetsand, Cut & Buff at Marine31Online.com