Quote:
Originally Posted by keitht2015
Maybe i'll use the heavy cut compound, and then polish, then wax.
Recommended pads for that? Using the PC, so I'll assume the Meguiar's thinner pads - any other recommendations for pads, etc?
I really appreciate your help!
|
For the compound I would use the Purple Foamed Wool THIN pads I show in a post above.
Fiber pads are always more aggressive than foam pads, even foam cutting pads.
Get 2-3 minimum and rotate them as you buff because when you're doing heavy cutting with these pads on a PC you'll generate a lot of heat and if you abuse these pads they will come apart.
Follow the compound and PFW's with the Meguiar's Maroon thin foam discs. Same thing, get a 2-3 minimum for the same reasons.
You're basically trying to use a PC for something that should be done using a rotary buffer or a Flex 3401 and this means you're going to be pushing pad technology to the limit. And as the saying goes...
Something has to give...
Then get a few of the yellow thin foam pads to apply the wax.
Take your time, steady as she goes and your boat will look like new again!