Marine 31 Forum

Marine 31 Forum (http://www.marine31online.com/forum/index.php)
-   Metal Polishing (http://www.marine31online.com/forum/forumdisplay.php?f=35)
-   -   Marine 31 Finish Cut Metal Restoring Polish (http://www.marine31online.com/forum/showthread.php?t=45)

Mike Phillips 05-22-2013 03:01 PM

Marine 31 Finish Cut Metal Restoring Polish
 
Marine 31 Finish Cut Metal Restoring Polish


http://www.marine31online.com/galler..._Polish_01.jpg


Say goodbye to dull, tarnished metal surfaces!


Marine 31 Finish Cut Metal Restoring Polish is a medium-cut polish designed to restore the brilliance and luster to uncoated aluminum and metal surfaces on your boat. Marine 31 Finish Cut Metal Restoring Polish creates a mirror-like finish that can be seen from a distance. If your boat’s brightwork is dull and oxidized, give it the attention it deserves with Marine 31 Finish Cut Metal Restoring Polish!

Staining and surface degradation on your boat’s metal surfaces is inevitable. Exposure to UV rays from the sun as well as salt in the air corrodes metal surfaces, causing them to lose their shine and luster over time. With Marine 31 Finish Cut Metal Restoring Polish, you can quickly and effortlessly remove staining and oxidation from your boat’s metal rails and fixtures while creating a mirror finish.


Before
http://www.marine31online.com/galler..._Polish_02.jpg


Buffing
http://www.marine31online.com/galler..._Polish_04.jpg


After
http://www.marine31online.com/galler..._Polish_03.jpg



Marine 31 Finish Cut Metal Restoring Polish utilizes an advanced abrasive that is designed to remove oxidation and staining without dulling the finish. With a few quick swipes of an applicator your boat’s brightwork will look better than new. What’s more, Marine 31 Finish Cut Metal Restoring Polish contains an anti-corrosive agent that protects the finish after you restore it!

Marine 31 Finish Cut Metal Polish is harbor safe and eco-friendly.


Directions:

1. Ensure surface is clean and cool to the touch. Not intended for clear coated surfaces.

2. Apply a small amount of polish onto a terry cloth applicator and thoroughly work the polish into the surface until it is clear and glossy.

3. For drill/polisher application, use a wool pad and follow the same application method.



Made in USA


On Marine31.com

Marine 31 Finish Cut Metal Restoring Polish



http://www.marine31online.com/galler...1-eco-logo.jpg


All times are GMT -4. The time now is 07:55 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.